Thank you for your long-term interest and support of HIWIN MIKROSYSTEM Corp. products. Due to the evolution of operating system, part of the MPI/API library components of servo drive products are unable to update. New feature development and technical support for servo drive’s MPI/API library and firmware to mega-ulink protocol (MoE) will be discontinued after the final version is released.
Product warranty for the drives that previously adapted MPI/API library or mega-ulink protocol remains in effect, but they will no longer support Windows 11 or above versions. Please refer to the end-of-support notice for detail information.
The end-of-support notice is as follows:
- End-of-support product: MPI/API library of servo drive, mega-ulink protocol supported servo drive
- Affected specifications:
- D1-36-Fx-x-xx-xx
- D2T-xxxx-F-xx
- ED1F-Hx-xxxx-xx-xx
- ED2F-Hx-xxx-x-x-xx
- Firmware versions and supported applications:
| Drive Models |
Support HIMC |
Support API/MPI (The final version is scheduled to be released at the end of October, 2024) |
| D1 Firmware Version |
9.910 |
0.252
(Support Win XP / 7 / 10, does not support Win11 or above versions) |
| D2T Firmware Version |
8.911 |
0.058
(Support Win XP / 7 / 10, does not support Win11 or above versions) |
| E1 Firmware Version |
2.10.7 |
2.10.7
(Support Win XP / 7 / 10, does not support Win11 or above versions) |
| E2 Firmware Version |
3.10.7 |
Does not support |
- Recommended replacement: We will provide an API library that supports USB connection in October 2024. Customers can switch the connection mode and adopt an industrial-grade USB hub to maintain the existing applications with less than five axes.
- Effective Date: 2024.10.07 (After the final version is released)
If end-of-support models are required, please inquire your local distributor for stock status. Sorry for any inconveniences that will cause.
Date of change: 2024.10.07